To find out whether your chain is too long take a look at it from the side with your eyes being level with the chain. A loose chain will sag close to or below the chainstays as the chain hangs between the rear cogs and chainring. The chain might skip as you pedal, or even drop off the gears.
What happens if the bike chain is loose?
The major symptoms of a loose chain include chain teeth skipping over the sprockets, uneven transmission of power to the wheel leading to jerky wheel movements, chain lash and the chain slapping the swindle arm, and in the final case, chain coming off the sprocket.
How does a bike chain get loose?
A motorcycle chain that keeps getting loose is usually caused by the rear axle or chain tensioning bolts not being tight enough. It can also be cause by a new chain not being worn in enough, worn down sprocket teeth, having too tight of a tension, or having the wrong size of chain installed.
Should my bike chain be loose or tight?
The rule of the thumb says that the exact tightness of a chain will only let you move for about half an inch. Now, if the chain is too loose, then you need to tighten it. If you cannot even move the chain, then it is too tight, and it needs to be loosened.
How do you check bike chain tension?
To check the correct chain tension is to see if you are able to move it around half an inch in either direction. If you are happy will how tight the chain is. Then you can tighten the rear axle nuts one by one.
Why does my chain keep getting loose?
Your chain might simply be too old or can stretch over time. When this occurs you need to replace it. Consider that your loose chain also may be due to operator error. Exceeding the recommended gear range for the rear derailleur on your bike may lead to a droopy chain when you ride in these gears.
Will a loose chain cause loss of power?
A tight chain and a loose chain will both lead to problems. A tight chain will increase friction on the chain and sprockets, leading to greater power loss in the drive train and excessive wear.
Why is my bike chain slack?
The chain is simply too long.
All new chains (not already on bicycles) come longer than they need to be. If you recently replaced your chain, and didn’t remove the extra links, this would cause the chain to be loose.
How much play should a bike chain have?
There should be approximately one half inch of movement in the chain up and down at a point half way between the front and rear sprockets. To change the tension loosen one of the axle-nuts and move the wheel forward or backward slightly and snug it up again.