When should you tighten bike spokes?

If your wheels were built well, once a year or less take it into the shop and get a touch up. If you do mess with your wheels it is just as important to loosen the opposite side spokes as you tighten one side to cure a hop. Sometimes if only one spoke is loose you don’t need to loosen others.

When should I tighten my spokes?

If there’s a big bump, or the wobble extends along the rim for several spokes’ distance, you may need to tighten more of the spokes that go to the other side of the rim.

Should bike spokes be tight or loose?

Basically the wheels should be as tight as possible without creating rounding and or galling when turning nipples. if in doubt refer to the late great sheldon brown. I built my first wheel ooh maybe 15 years ago using his site.

Should all bike spokes be tight?

The spokes should feel tight and firm. They should have just a little give when you squeeze them fairly hard. Repeat this process with the next pair of spokes and so on until you have worked all the way around the wheel and felt every spoke. Squeeze a few spokes on other bikes to get an idea of how they should feel.

IT IS INTERESTING:  Quick Answer: What size bike do you need if you are 5ft tall?

How do you tell if your spokes are too loose?

Your wheels should not rattle! It could be several things, but it’s often loose spoke nipples. (It’s what they’re called… go ahead and giggle.) If your spokes are so loose they rattle, they’re providing virtually no strength to the wheel structure.

How often do you need to true a wheel?

They should all have a nice high note. You should have them trued and tensioned about once a year if you ride often. To be honest I don’t check every ride, especially since I got disc brakes. I’ve never tacoed a rim either.

Can you ride a bike with a loose spoke?

Never ride with a loose spoke. The friction created will cause the rider to burst into flames and may even cause the Earth to slip off it’s axis.

What happens if you over tighten spokes?

Spoke tension is important to ensure your wheels are strong, reliable and long lasting. Spokes that are too loose will continue to loosen and require constant wheel truing. Spokes that are too tight will cause damage to the rim, spoke nipples and hub flanges.

Can loose spokes make noise?

Spokes often move as they pass under your body weight with each wheel revolution. This can produce a tick or click noise, which comes from where the spokes touch each other at the cross. … Loose spokes can also cause noises. So, I went around the wheel one more time, turning each spoke nipple a full turn.

Can you tighten spokes with pliers?

No, never use pliers to tighten spokes. Use a dedicated spoke wrench which can be purchased at your local bike shop. If you do not have a wheel truing stand, have your wheels trued and tighten by a reputable bike shop mechanic. You can, but it’s really not recommended.

IT IS INTERESTING:  How does wheelbase affect bike handling?

Which way do bike spokes tighten?

The key to truing is adjusting the spoke(s) on the correct side of the wheel. Note that the spokes have nut-like devices at the rim called nipples. When viewed from above, nipples are turned clockwise with the spoke wrench to tighten spoke tension and counterclockwise to loosen it.

Why do bike wheels go out of true?

One of the most common reasons wheels go out of true: loose spokes. Check tension by squeezing two spokes at a time between your thumb and fingers, says LaPorta. … To tighten it, use a spoke wrench to turn the nipple clockwise, in quarter-turn increments. If the wheel’s still wobbly, it’s out of true.