How tight should bicycle spokes be?

On front wheels the tension should be equal on both sides. On rear wheels the tension will be higher on the right side, or drive side of the wheel. Therefore proper spoke tension should be measured on both sides, but set to the right side spokes of rear wheels.

How do I know if my bike spokes are too tight?

Spokes that have too much tension can result in deforming and/or cracks near the nipple holes of the rim, as seen in the image below. Notice crack at red arrow. Too much tension can also lead to failure of the hub flange.

Should bike spokes be tight or loose?

Basically the wheels should be as tight as possible without creating rounding and or galling when turning nipples. if in doubt refer to the late great sheldon brown. I built my first wheel ooh maybe 15 years ago using his site.

Do I need to tighten my spokes?

Generally it is preferable to tighten spokes rather than loosening them – spokes may loosen themselves over time if they are run too loose, but they will not tighten up on their own.

IT IS INTERESTING:  Can you reuse a punctured bike tire?

How often do spokes break?

Well, 5000 to 6000 miles of riding is an average duration on how often the bike spokes break. But, some riders have completed around 20000 miles with a single pair of wheels. Where few riders get broken spokes even before completing 500 miles. So, you can’t say exactly how often do bike spokes break.

What happens if you over tighten spokes?

Spoke tension is important to ensure your wheels are strong, reliable and long lasting. Spokes that are too loose will continue to loosen and require constant wheel truing. Spokes that are too tight will cause damage to the rim, spoke nipples and hub flanges.

Which way do you tighten bike spokes?

The key to truing is adjusting the spoke(s) on the correct side of the wheel. Note that the spokes have nut-like devices at the rim called nipples. When viewed from above, nipples are turned clockwise with the spoke wrench to tighten spoke tension and counterclockwise to loosen it.

Can you ride a bike with a loose spoke?

Never ride with a loose spoke. The friction created will cause the rider to burst into flames and may even cause the Earth to slip off it’s axis.

Can you tighten spokes with pliers?

No, never use pliers to tighten spokes. Use a dedicated spoke wrench which can be purchased at your local bike shop. If you do not have a wheel truing stand, have your wheels trued and tighten by a reputable bike shop mechanic. You can, but it’s really not recommended.

IT IS INTERESTING:  Does biking work your arms?

How much does it cost to true a bike wheel?

How much does it cost to true a bike wheel? You can expect to spend anything between $10 and $30 to true a bike wheel at the local bike repair shops. But if you decide to go DIY, you’ll spend anything between $80 and $320 on a professional bike truing stand.

How often should you true your bike wheels?

If you ride only on flawless dry roads and in perfect weather conditions, it is recommended that you still check your bearings at least every 8 weeks. While the wheel is attached to the bike, try to move the wheel from side to side, if you feel it’s loose, adjust accordingly. Clean and re-grease the wheel’s bearings.