The method that you use to raise the handlebars on your mountain bike will depend on which type of setup your bike has. Whether you have a Threaded or Threadless Headset Seam, the process will consist of loosening the bolts with an Allen key or a wrench, and adjusting the sizing before securing it back together.
Can you lift handle bars on a bike?
You should be able to raise the handlebar without changing anything else. If you raise it significantly, however, the brake and gear cables may be too short. The cables need to be replaced if the outers are taut, especially if they restrict the steering.
What height should handlebars be on a mountain bike?
Place the 4 foot spirit level on the middle of the saddle and extend it outwards over the top of the handlebar. 3. For a performance road position, the top of the handlebar should be about 5-6 cm below the mid-point of the saddle.
Should bike seat be higher than handlebars?
As a general rule of thumb, you want the top of the handlebar about as high (or higher than) the saddle, unless you’re a sporty rider looking to ride fast. Try touching your elbow to the nose of the saddle and reaching forward towards the handlebar with your hand.
Are stem risers safe?
As was said, stem risers will be fine for light use, but a better solution, especially for MTBing, would be a set of riser bars and a ~35 degree stem.
How high should handlebars be?
Your handlebars should be at least as high as your seat, or even above it, so you can ride upright. If your handlebars are lower than your seat you’ll be pushed into your handlebars, and you’ll place more stress on your wrists, arms, neck, and back.