Are wider mountain bike handlebars better?

Over the years, mountain bike handlebars have got progressively wider, because increased width can improve control of the bike. Some also believe it can open up your chest and improve breathing. The wider the bar, the more leverage you can apply to the front wheel to force the bike onto more aggressive lines.

How wide should mountain bike handlebars be?

Handlebar width should purely depend on the size of the rider and more importantly the width of their shoulders. The most common mountain bike handlebar widths range from around 710mm to 780mm. However, shorter riders may require much narrower bars, and very tall riders may require a full 800mm handlebar.

Are wider handlebars more comfortable?

Wide handlebars also have their place, and some riders and bikes are better with them. … If your handlebars are too narrow, your shoulders feel strained when riding in this position. Bars that are wider than your shoulders feel more natural if you ride with your elbows locked.

Should I get wider handlebars?

If you change your handlebar’s width, then you’ll also change how your bike rides. Making the switch to a narrower handlebar will wake up the front end of your bike making it more twitchy and easier to maneuver; while a wider bar will increase the stability of your front end and provide a calmer feel than before.

IT IS INTERESTING:  Can you put a visor on a dirt bike helmet?

Why are mountain bike handlebars wide?

Mountain bikes have wider handlebars because the wider the riders grip is on the handlebars, the easier it is to transfer input from the hands to the wheel. It takes much less power to move a wider handlebar, but at the same time, you have to move the handlebars a lot more to make it go in a certain direction.

Is 800mm handlebar too wide?

The short answer is “yes.” The long answer is, well, kinda long. At six-foot-three-inches tall, an 800mm handlebar allows me to get into a super comfortable and stable position while maintaining a posture that is conducive to both shoulder strength and mobility. A perfect world right there.

How do I choose the right handlebar width?

The rule of thumb when selecting the correct handlebar width is to measure the distance between the two bony bits on your shoulders – in more scientific terms the distance between your two acromioclavicular (AC) joints. This measurement gives you a baseline – if it’s 38cm, look for 38cm bars – and so on.

Are wider road handlebars better?

One says a wider bar gives you more control and leverage, just like with mountain bike handlebars, and it opens up your chest for easier breathing. The other says that a slightly narrower bar opens up your shoulders and back, which reduces muscular fatigue and tightness. It also may make you a bit more aerodynamic.

Are narrow bars faster?

Narrow handlebars can speed up handling and decrease steering accuracy, which isn’t what you want when riding off-road, or if you’re a less experienced rider. Because of this, Koop recommends narrow handlebars are “best suited to a more steady riding style” and more experienced riders.

IT IS INTERESTING:  Quick Answer: How long does a bike service take?

Do riser bars increase reach?

Riser Bars Do Not Decrease The Effective Reach

Ultimately, the reach determines how stretched the rider is on the bike. … Relying on spacers to raise the handlebars will decrease the effective reach of the bike because the headtube and consequently the fork’s steerer insert at an angle.

Can you change the handlebars on a mountain bike?

The method that you use to raise the handlebars on your mountain bike will depend on which type of setup your bike has. Whether you have a Threaded or Threadless Headset Seam, the process will consist of loosening the bolts with an Allen key or a wrench, and adjusting the sizing before securing it back together.

How wide should XC bars be?

PRO handlebars also come in a variety of width options with the trail and enduro-style bars typically coming in at 800 mm, while the flatter, XC bars ranging from 700 mm to 740 mm.

How does handlebar width affect reach?

I’ve always gone by the rule that a change in reach is about the same as doubling that increase in bar width. So if you increase bar width by 2″, you would need to decrease reach by 1″.