What Should I Inspect on My Motorcycle? The Motorcycle Safety Foundation (MSF) suggests checking six areas before each ride. It uses the acronym T-CLOCS to help riders remember to take a look at the tires and wheels (T), controls (C), lights and electrics (L), oil and other fluids (O), chassis (C) and stands (S).
How do you check a motorcycle before a long ride?
You don’t really need to be an expert to easily spot any signs of wear and tear. Just look for the obvious signs like lack of lubrication, slack, and wear and tear. You can check if your bike’s chain is too slack or too tight just by inserting your fingers at the middle point between the front and rear sprockets.
How do you prepare a motorcycle for a long ride?
Prepare Your Bike.
- Change the oil and filter.
- Check the air and fuel filters.
- Check all fluid levels.
- Adjust throttle and brake cables.
- Adjust and lube the drive chain (if applicable)
- Check tire pressure and tread.
- Check all gauges, lights, horn and signals.
- Visually inspect the entire bike for any broken or worn parts.
What should I check on my motorcycle?
- First on your checklist should be your number plate and registration sticker (if required) are still firmly fitted and clearly visible. …
- Go around the motorbike and look for any oil, water or fluid leaks. …
- Check the throttle, brake lever/pedal and clutch lever for a bit of free play.
How long is too long on a motorcycle ride?
For most motorcycle enthusiasts, riding 1,000 miles in 24 hours or even 1,500 miles in 36 hours isn’t too tough of a challenge, but if you’ve never ridden further than 400-500 miles in a day, then two consecutive days of 500 mile trips could really put you over the edge.
How often should you check motorcycle oil?
So a weekly oil level check, and a top off whenever necessary, really is a vitally important part of looking after your motorcycle.
What motorcycle is best for long distance?
These Are The Best Motorcycles To Take On Long Road Trips
- 8 BMW R1250GS.
- 7 Kawasaki H2 SX SE.
- 6 Yamaha Star Venture Transcontinental.
- 5 Triumph Tiger Explorer.
- 4 Suzuki V-Strom 1000 ABS.
- 3 Indian Roadmaster.
- 2 Ducati Multistrada 1260.
- 1 KTM 1290 Super Duke GT.
How can I ride my bike long distance?
Motorcycle Checklist For Long Distance Touring
- Start early, finish early. …
- Plan the day’s route. …
- Fill the tank before setting off. …
- Stop and hydrate yourself properly. …
- Make sure bike is serviced before the trip. …
- Ensure tyres are in good condition. …
- Ensure all lights work. …
- Leave the mirrors on!
How many miles can a motorcycle go in a day?
Generally, most experienced motorcycle riders can handle about 300 miles on a daily average.
What does powders stand for?
The acronym which many people find easy to remember is POWDER, which stands for: P = Petrol. Is there sufficient fuel for the journey? There’s nothing worse than having to remove all your luggage 5 minutes after setting out on your annual trip.
How should I pack my motorcycle for a long distance trip?
A full-head helmet, warm gloves, riding boots, base layers, and heated gear are some of the things you should have on your list. These items are important to pack, but completing an approved safety course can prepare you for a long road trip on your bike and could save you money on your motorcycle insurance policy.
Is it bad for a motorcycle to sit for long periods of time?
If unused, over time your motorcycle battery will drain. There is a phenomenon called “parasitic drain” where the motorcycle computers and poorly grounded wires cause slight discharge. … If you let your motorcycle sit for long periods of time, this will completely drain the battery.
How far is too far on a motorcycle?
So, to answer the question “how far is too far to bike to work?” I’d have to say that it’s largely up to you, but 10 to 20 miles seems to be a reasonable distance – any more than that and it starts to be too much. But there are always exceptions to the rule, and being prepared can help.