You asked: How do you know if your motorcycle chain is worn out?

How do I know if I need a new motorcycle chain?

Another, much easier way to check for a worn chain is to try to pull the chain away from the rear of the sprocket on the rear wheel. If the chain is worn, you’ll reveal about half a tooth of the sprocket. A new chain will wrap around the sprocket snugly and won’t pull away.

When should you replace a motorcycle chain?

Depending on your bike your chain may require adjustments frequently or rarely, it really all depends. It’s common to have chains require more and more frequent adjustments as they become worn out, so if your chain has more than 10 or 15,000 miles on it you might want to start watching for signs of stretching.

What does a bad motorcycle chain feel like?

Another symptom of a loose chain on a motorcycle is a chain tug, a tugging feeling you feel when the bike keeps steady RPMs in a lower gear, which is another symptom of a loose chain.

How many miles does a motorcycle chain last?

Don’t clean and lube your chain, replace it more often. It depends on how much rain/sand/grit you ride through in addition to your efficacy and frequency of chain cleaning. I often got 10,000 to 15,000 on a liter bike chain. I often got 20,000 to 25,000 on a VStrom 650 chain with a chain oiler.

IT IS INTERESTING:  Do motorcycle windshields make a difference?

How much does it cost to replace a motorcycle chain?

How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

How often should a motorcycle chain be lubed?

A motorcycle chain should be lubricated every 300-600 miles to ensure peak performance and a long life. Lubricate the chain after riding, not before. This allows time for the solvents in the spray to evaporate before the bike is used again, and lets the lubricant penetrate the link properly.

What can a loose motorcycle chain cause?

The major symptoms of a loose chain include chain teeth skipping over the sprockets, uneven transmission of power to the wheel leading to jerky wheel movements, chain lash and the chain slapping the swindle arm, and in the final case, chain coming off the sprocket.

How often does a motorcycle chain need adjusting?

You should check and adjust your chain every 500 miles (805 km), and more often for a dirt bike. It’s also a great time to look for kinks or rust, and to give your chain a quick cleaning and lubrication, too.

How long does a bike chain last?

So, typically, a bike chain can last anywhere from 500 to 5,000 miles, depending on the type of chain you buy and the number of miles you put on your bike. If you ride your bike very seldom, or only go on the occasional evening ride, your bike chain can last years with good maintenance.

IT IS INTERESTING:  Is motocross a sport or hobby?

How do I know if my chain is loose?

To find out whether your chain is too long take a look at it from the side with your eyes being level with the chain. A loose chain will sag close to or below the chainstays as the chain hangs between the rear cogs and chainring. The chain might skip as you pedal, or even drop off the gears.

How tight should a motorcycle chain be?

On average, however, most street motorcycles will need a chain tension of about 20 – 30 mm, or about a half inch to an inch in slack. This means that the chain should be able to move about a half inch to an inch up and about a half inch to an inch down. It’s easiest to measure this using a measuring tape.

What is considered high mileage for motorcycle?

For smaller sports bikes, a mileage above 20,000 to 30,000 is on the high side, while larger motorcycles are considered high-mileage after the 50,000-mile point.