Question: How do I raise the fork on my motorcycle?

How do you drop a motorcycle fork?

The only real way to do this is to raise the bike’s front end off the ground with a proper stand (one that raises the bike from the lower triple clamp, NOT the race stands that prop up under the bottom of the fork tubes), remove the fork springs and slowly raise the fork until it bottoms out.

How does preload affect suspension?

Preload is used to adjust the shock or spring to the correct range of operation within the suspension’s travel-more preload will raise the bike up on its suspension, keeping you near the top of its travel. With less preload, the bike sits lower and closer to the bottom of its suspension travel.

Does adjusting preload change ride height?

Adjusting preload simply determines the motorcycle’s ride height. … Basically, when ride height is overly high there is too little sag. The bike rides near the top of its suspension travel, it’s stiff, uncomfortable, and if you’re vertically challenged you may have trouble reaching the ground.

Does increasing preload increase ride height?

Preload is independent of spring free length. An 18″ long, 100 lb/in spring with 1″ of preload will give you the same ride height as a 10″ long, 100 lb/in spring with 1″ of preload. In both cases you’ve applied 100 lb of force before the vehicle weight collapses the spring. … The result is the same amount of ride height.

IT IS INTERESTING:  How long does it take to build a motorcycle?