A motorcycle chain should be lubricated every 300-600 miles to ensure peak performance and a long life. Lubricate the chain after riding, not before. This allows time for the solvents in the spray to evaporate before the bike is used again, and lets the lubricant penetrate the link properly.
How often should you lubricate your motorcycle chain?
As a general rule of thumb, it’s best to clean and lubricate a motorcycle chain with O-rings at least every 600 miles, while plain chains require more frequent attention.
Should I oil my chain after every ride?
“In the winter months it’s advisable to clean and lube your chain ideally after every ride depending on where you have been riding,” says Sampson. She recommends using a degreaser and chain cleaner to give the chain a thorough, deep clean in order to ensure it’s sparkling before re-lubing.
How do I know if my motorcycle chain needs lube?
You should always lube/clean your chain if it looks dry or rusty, OR if it’s become a gooey oily mess. Remember, you can add too much lube, and this will just attract dirt.
What happens if you dont oil motorcycle chain?
Without Lube: A dry chain will let out an ear-piercing squeal and won’t shift smoothly. Eventually, it will rust, and it could snap midride. Lube It: Soak a clean rag with degreaser, such as Pedro’s Oranj Peelz Citrus Degreaser.
How often should you degrease and lube bike chain?
Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.
Should you use WD40 on a bike chain?
Can I use WD-40 to lube my bicycle chain? No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant since it’s primary use is as a solvent or rust dissolver.
Do you need to degrease bike chain?
And if you ride regularly, remember to clean and lube your chain at least once a month. If you like exploring off-road and getting your bike muddy, you should clean it even more than that.
How often do you need to lube chain?
Lube your chain when the cracks and crevices are vacant of lube. Ride 5 miles a week in good weather and you’re good for months. Average 30 miles a week in good weather and you should be lubing about every 2 weeks.
How often does a motorcycle chain need adjusting?
You should check and adjust your chain every 500 miles (805 km), and more often for a dirt bike. It’s also a great time to look for kinks or rust, and to give your chain a quick cleaning and lubrication, too.
How many miles does a motorcycle chain last?
Don’t clean and lube your chain, replace it more often. It depends on how much rain/sand/grit you ride through in addition to your efficacy and frequency of chain cleaning. I often got 10,000 to 15,000 on a liter bike chain. I often got 20,000 to 25,000 on a VStrom 650 chain with a chain oiler.
Do new bike chains need oiling?
New chains come pre-lubricated with a grease-type lubricant which has been installed at the factory. … It is best not to apply any sort of lube to a new chain until it is clearly needed, because any wet lube you can apply will dilute the factory lube.
What happens if I dont clean bike chain?
There should be no major problems by not cleaning and lubing for 1,400 miles. The reason you clean it is so dirt won’t build up and wear the teeth on the sprocket. Also, you lube the chain to protect the o-rings so it won’t stretch (as much) and prevent rust.
Can I use engine oil as chain lube?
Usage of engine oil or grease is not at all recommended over a proper chain lubricant. Grease wont penetrate into the O rings and X rings as compared to chain lubricant. Whereas engine oil lasts only for a few days which reduces the life of your chain and sprocket.