A motorcycle chain should be lubricated every 300-600 miles to ensure peak performance and a long life. Lubricate the chain after riding, not before. This allows time for the solvents in the spray to evaporate before the bike is used again, and lets the lubricant penetrate the link properly.
How do I know if my motorcycle chain needs lube?
You should always lube/clean your chain if it looks dry or rusty, OR if it’s become a gooey oily mess. Remember, you can add too much lube, and this will just attract dirt.
Should I oil my chain after every ride?
“In the winter months it’s advisable to clean and lube your chain ideally after every ride depending on where you have been riding,” says Sampson. She recommends using a degreaser and chain cleaner to give the chain a thorough, deep clean in order to ensure it’s sparkling before re-lubing.
Is WD40 good for motorcycle chains?
If the chain is wet using a water displacing lubricant like WD40 is better than proper chain lube. It will chase the moisture out instead of sealing it in. In dirty conditions you do not really want sticky lube on the chain rollers where it contacts the sprockets. … Lube the chain before you wash the bike not after.
Which motorcycle chain lube is best?
The Top 3 Chain Lubes
- Motul C5 Chain Paste. For over 150 years Motul has produced premium oil and lubricants. …
- WD-40 Motorcycle Chain Lube. WD-40 Specialist Motorcycle Chain Lube, like all their products,is an easy to apply synthetic formula. …
- Motorex Racing Chain Lube.
Do you need to degrease bike chain?
And if you ride regularly, remember to clean and lube your chain at least once a month. If you like exploring off-road and getting your bike muddy, you should clean it even more than that.
How often should you dry chain lube?
Dry chain lube typically has a lifespan of up to 100 miles. Wax chain lube should be reapplied every 50 to 100 miles. Wet chain lube can last well over 100 miles, and Finish Line’s Ceramic Wet Chain Lube can reportedly last even longer with a limit of 175 miles.
How often does a motorcycle chain need adjusting?
You should check and adjust your chain every 500 miles (805 km), and more often for a dirt bike. It’s also a great time to look for kinks or rust, and to give your chain a quick cleaning and lubrication, too.
Can I use engine oil to lubricate motorcycle chain?
Usage of engine oil or grease is not at all recommended over a proper chain lubricant. Grease wont penetrate into the O rings and X rings as compared to chain lubricant. Whereas engine oil lasts only for a few days which reduces the life of your chain and sprocket.
Can gear oil be used as chain lube?
Of course you can use gear oil on your chain. It’s an extremely good high pressure viscous lubricant, and unlike engine oils, it does not contain detergent additives which make engine oil less resistant to water washout.
What is the best way to clean a motorcycle chain?
Use your chain-specific brush or toothbrush to scrub every link in the chain, paying close attention to the spaces between links and any buildup or dirt and grime. If possible, rotate the rear tire to cycle the chain’s rotation, so you can access it entirely. Clean your rear sprocket.
Is paraffin OK to clean motorcycle chain?
Verdict: Hell yes. Paraffin is fantastic at repelling things that should be repelled. The difference in the debris your motorcycle chain collects over the course is going to be night and day. … One thing that annoys the living heck out of most people when cleaning chains is the black grease stains that get on everything.
What’s the difference between chain lube and chain wax?
The ONLY difference between them is the form they exist in—where the chain wax comes in the form of paste and chain lube comes in liquid/spray form. … Prolonging the lifespan of your chain: no matter which one you choose, both the wax and lube will oil your chain well and help reduce friction.