Another, much easier way to check for a worn chain is to try to pull the chain away from the rear of the sprocket on the rear wheel. If the chain is worn, you’ll reveal about half a tooth of the sprocket. A new chain will wrap around the sprocket snugly and won’t pull away.
When should I replace my motorcycle chain?
Try to pull the chain away at the very end of its travel where it wraps around the rear sprocket. If you can pull any of the links away from the sprocket enough to see daylight between the two, that’s a clue that your final drive system is going to need to be replaced soon.
How many miles does a motorcycle chain last?
Don’t clean and lube your chain, replace it more often. It depends on how much rain/sand/grit you ride through in addition to your efficacy and frequency of chain cleaning. I often got 10,000 to 15,000 on a liter bike chain. I often got 20,000 to 25,000 on a VStrom 650 chain with a chain oiler.
How often should you maintain motorcycle chain?
As a general rule of thumb, it’s best to clean and lubricate a motorcycle chain with O-rings at least every 600 miles, while plain chains require more frequent attention.
How much does it cost to replace a motorcycle chain?
How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.
How often does a motorcycle chain need adjusting?
You should check and adjust your chain every 500 miles (805 km), and more often for a dirt bike. It’s also a great time to look for kinks or rust, and to give your chain a quick cleaning and lubrication, too.
How do I know if my chain is worn out?
Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.
How often should a motorcycle chain be lubed?
A motorcycle chain should be lubricated every 300-600 miles to ensure peak performance and a long life. Lubricate the chain after riding, not before. This allows time for the solvents in the spray to evaporate before the bike is used again, and lets the lubricant penetrate the link properly.
What is considered high mileage for motorcycle?
For smaller sports bikes, a mileage above 20,000 to 30,000 is on the high side, while larger motorcycles are considered high-mileage after the 50,000-mile point.
What motorcycle chain is best?
The 4 Best Motorcycle Chains
- 1. RK Racing Chain 520-SO-120 120-Links O-Ring Chain with Connecting Link.
- RK Racing Chain GB520XSO-120 120-Links Gold X-Ring Chain with Connecting Link.
- DID 520ERT2 – 120 link Gold Chain with Connecting Link.
- Renthal C294 R3-2 O-Ring 520-Pitch 120-Links Chain.
Can I put wd40 on my motorcycle chain?
It is highly recommended that you do not use Multi-Purpose WD-40 on your motorcycle chain. The WD stands for Water Displacement, and it is designed to disperse water away from metal parts to prevent rust.
How often should you wax motorcycle chain?
Your motorcycle’s chain needs to be lubricated every 400-800 miles to keep it at its best. This can vary depending on your bike’s use; road bikes will need the chain cleaning less than off-road bikes.
When should you clean and lube a motorcycle chain?
Motorcycle chains have a tendency to attract dirt. Some more than others. You should always lube/clean your chain if it looks dry or rusty, OR if it’s become a gooey oily mess. Remember, you can add too much lube, and this will just attract dirt.
Should I lube my dirt bike chain?
Use dirt bike chain lube before each ride and after every wash. Apply a dedicated chain lube that’s designed to avoid attracting dirt to the chain before each ride or race. … For trail riders using an O-ring or X-ring chain, lubing the chain at the start of the day is enough.