How do you check rear shocks on a motorcycle?

Secondly, to check function you need to push down on the rear suspension and then let go. It should rise steadily back up and not overshoot and sink back down. The same can be done by lifting up the rear of the bike and letting it fall back. It should fall and settle, without sinking and coming back up.

How do I know if my motorcycle rear shocks are bad?

The easiest way to tell is if they don’t feel like they used to before. Also you will see some excessive oil leaks along the rubber seals. Some of them get rusted on the coils too, try to polish them and see if it’s just surface rust, if so, it’s safe. If the rust had eaten the coils, then it’s bad it could snap.

How do I know if my rear shocks are bad?

The Warning Signs Of Worn Shocks And Struts

  1. Instability at highway speeds. …
  2. Vehicle “tips” to one side in turns. …
  3. The front end dives more than expected during hard braking. …
  4. Rear-end squat during acceleration. …
  5. Tires bouncing excessively. …
  6. Unusual tire wear. …
  7. Leaking fluid on the exterior of shocks or struts.
IT IS INTERESTING:  Is a 1979 motorcycle tax exempt?

How long does a motorcycle rear shock last?

How long should my shock absorber last? Ideally, suspension should be serviced every three years if you want to really keep it working at its best, though five years should be okay for most road riders.

How do you check a bike suspension?

Inspect your suspension before you clean your bike, search for wet spots. Wash your bike. After you wash it, force the suspension to travel a few times, or take the bike around the block which will produce the same result. Inspect again, and again, search for wet spots.

How do you check rear shock absorbers?

The usual way to test a shock absorber is to push down on a corner of the vehicle a few times to get it to bounce and then stop pushing and see how much it continues to bounce before stopping. A good shock absorber should stop the bouncing right away.

How do you adjust rear shocks on a motorcycle?

To adjust the preload on your bike’s rear shock, you will need a C-spanner to loosen the top locking ring and spin it up the shock to gain access to the adjuster ring. If you want to increase preload so the spring has less travel and to make the bike feel stiffer, turn the adjuster ring clockwise.

How long do shocks last on a motorcycle?

I generally replace most shocks by 50,000 miles and upgrade the front suspension with springs and aftermarket valves by the same time period. Your front forks need regular maintenance – at least every two years or every year if you pile on a lot of miles.

IT IS INTERESTING:  Frequent question: Do motorcycles have to pay for parking UK?

How do I know if my rear springs are bad?

When the suspension spring starts to wear out, they compresses quite easily meaning the vehicle’s suspension will move up and down and feel like it is ‘bouncing’ more frequently. If you notice that your vehicle is bouncing more in normal driving conditions it’s a good indication that you may need replacement springs.

How do you know if you need new shocks?

What Are the Signs that My Vehicle Needs New Shocks or Struts?

  1. Bumpy ride. The most obvious sign of a problem with your shocks or struts is that your car is giving you a much more uncomfortable ride than normal. …
  2. Steering problems. …
  3. Braking problems. …
  4. Fluid leaks. …
  5. Unusual tire tread wear. …
  6. Mileage.