Frequent question: How wide should motorcycle handlebars be?

As far as industry standards, Handlebars typically come in either 1″ or 7/8″ diameter. Almost all Harley applications will use 1″, however, for those riders looking for fatter bars 1 1/4″ and 1 1/2″ are available and may require special clamps/hand controls depending on the bars.

How wide should your handlebars be?

The standard fitting advice is to get a handlebar as wide as the measurement between your AC joints. Those are the bumps atop your shoulders where the collarbone attaches just inboard of your deltoid muscle. But many riders prefer a handlebar slightly wider than their shoulders. A wide bar opens the chest.

Are 800mm bars too wide?

The short answer is “yes.” The long answer is, well, kinda long. At six-foot-three-inches tall, an 800mm handlebar allows me to get into a super comfortable and stable position while maintaining a posture that is conducive to both shoulder strength and mobility. A perfect world right there.

What is the average handlebar width?

Width: Most companies measure a bar’s width between the center of each drop. Common sizes are 38, 40, 42, and 44cm.

Are wider road handlebars better?

One says a wider bar gives you more control and leverage, just like with mountain bike handlebars, and it opens up your chest for easier breathing. The other says that a slightly narrower bar opens up your shoulders and back, which reduces muscular fatigue and tightness. It also may make you a bit more aerodynamic.

IT IS INTERESTING:  Do you need to take a CBT for a 50cc moped?

Why are wider handlebars better?

Making the switch to a narrower handlebar will wake up the front end of your bike making it more twitchy and easier to maneuver; while a wider bar will increase the stability of your front end and provide a calmer feel than before.

What is standard handlebar diameter?

The most common diameter is 31.8mm, but older bars can be 25.4mm and there’s even an oversize 35mm standard being introduced by Race Face that promises even greater strength and stiffness.

Do wider bars increase reach?

Wider will make reach longer but not too much unless your smallish. The bars can also be shortened. If you do get new bars I’d ride them abit before cutting to see what works.

How wide should my hybrid handlebars be?

On hybrids and flat-bar road bikes (“fitness” bikes), comfort is usually the overriding concern, so these typically come with very wide handlebars of about 56cm to 70cm. … Mountain bikers who still have a preference for narrower bars might use something in the range of 54cm or 55cm.

How wide should XC bars be?

PRO handlebars also come in a variety of width options with the trail and enduro-style bars typically coming in at 800 mm, while the flatter, XC bars ranging from 700 mm to 740 mm.

Are narrow handlebars better?

Narrow handlebars can speed up handling and decrease steering accuracy, which isn’t what you want when riding off-road, or if you’re a less experienced rider. Because of this, Koop recommends narrow handlebars are “best suited to a more steady riding style” and more experienced riders.

IT IS INTERESTING:  Your question: How do I fix my motorcycle vibration?

How do you measure handlebar width?

Are you ready? To get your RideLogic sweet spot handlebar width in millimeters: If you’re male, multiply your height in millimeters by 0.440. If you’re female, multiply your height in millimeters by 0.426.

What width handlebars do pros use?

Some sprinters like Dehaes often use narrower bars, but in the 38-40cm range. Most riders have 40-42cm bars in the pro peloton.

Are narrower bars faster?

With narrow bars, the rider’s frontal area is more compact, making it possible to push through the air quicker and easier.